Fujikura FSM-40S - Advantel Optical Technology Co.Ltd

Features:
1)Core-to-core fiber alignment system (PAS)

2)Fast splicing & Full automatic operation

3)Compact, lightweight and various power supply options

4)2 CCD cameras, No up-down mirror

5)High resolution 5 inch color LCD monitor

6)Simultaneous X & Y axes observation

7)Automatic Arc calibration function for stable arc discharge

8)Automatic fiber type identifier and self diagnostic test function

SPECIFICATIONS
Applicable fibers	SM(Singlemode), MM(Multimode) and DS(Dispersion shifted) fibers. NZ-DS (Non-zero dispersion shifted),CS(Cut-off shifted) and ED(Er doped) fibers are also applicable with special mode.
No. of fibers to be spliced	Single to single fiber.
Fiber cleaved length	8 to 16mm with 250μm outer coating diameter. 16mm (standard) or 8 to 16mm (option) with outer coating diameter of more than 250μm up to 1000um (1.0mm).
Actual average splice loss	0.02dB with SMF, 0.01dB with MMF and 0.04dB with DSF to ITU-T Recommendations G.652, G.651 and G.653 respectively, when measured by the cut-back method to relevant ITU-T and IEC standards.
Splicing time	Typical 18 sec.
Return loss	>> 60dB.
Splicing modes	40 user programmable modes and up to 60 modes for reference (factory predetermined setting).
Splice loss estimate	Core deformation and MFD mismatch as well as core axial offset can be taken into account for more accurate estimate.
Attenuation splice function	Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator.
Storage of splice result	The last 2000 results to be stored in the internal memory.
Fiber display	X/Y, or both X and Y simultaneously
Magnification of fiber	264X or 132X.
Viewing method	CCD camera and 5" TFT color LCD monitor.
Altitude, Humidity andTemperature compensation	0 to 3,500m above sea level. 0 to 95%RH and -10 to 50°C, respectively.
Mechanical proof test	2N (standard) / 4.4N (option)
Tube heater	Built-in tube heater with 30 heating modes.
Applicable protection sleeve length	60mm, 40mm and a series of micro sleeves.
No. of splices with detacheable battery	Approx. 40 times (including heatings) per full charge with BTR-05.
Power supply	Auto voltage selection from 100 to 240Va.c. with ADC-07, 10.5 to 14Vd.c. with DCA-01 and 12Vd.c. with BTR-05.
Wind protection	Max. wind velocity of 15m/s.
Dimensions	172W x 186D x 180H (mm)
Weight	4.4kg (4.9kg including AC adapter ADC-07).

ITEMS INCLUDED WITH THE FSM-40S SPLICER KIT
Item	Description	Model No.	Q'ty
1	Single fiber fusion splicer	FSM-40S	1pc.
2	Detachable AC adapter/ Battery charger	ADC-07	1pc.
3	AC power cord	ACC-XX	1pc.
4	Spare electrodes	ELCT1-25	1pair
5	Top cover	TC-03A	1pc.
6	Monitor cover	MC-01	1pc.
7	Rugged FRP case	CC-02	1pc.
8	Instruction manual	-	1pc.
9	High precision fiber cleaver	CT-04/07	1pc
10	Detachable battey pack	BTR-05	1pc
11	Battery charge cord	DCC-08	1pc

OPTIONAL ACCESSORIES
Description	Model No.
Detachable battey pack	BTR-05
Battery charge cord	DCC-08
Detachable DC adapter	DCA-01
DC power cord	DCC-01/04/05
Working table	WT-5
Workig table support	WTS-1
J-plate	JP-03A
High precision fiber cleaver	CT-03/04/07
Primary coat stripper	PS-02
Nylon Jacket stripper	JS-01
Alcohol dispenser	HR-1
Protection sleeves	FP-03/03(40mm)
Protection sleeves	FPS01-250-20/25/34